Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple, 5/16, 3/8, 1/2 in Staple Length
Mayhew™ 62065 X-Long Pin Punch Kit, Hex Shank, 9-1/2 in OAL, 5 Pcs
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade
Cable Trays & Struts
-
![PHD S1012 PG Straight Channel Strut, 1-1/8 x 9/16 in Slots, 2 in Spacing, 12 ga Thick, 20 ft L]()
PHD S1012 PG Straight Channel Strut, 1-1/8 x 9/16 in Slots, 2 in Spacing, 12 ga Thick, 20 ft L HSI#: FAS50562In stock$52.67$52.67 -
![PHD S1312 PG Half Slotted Channel, 1-1/8 x 9/16 in Slots, 2 in Spacing, 14 ga Thick, 20 ft L]()
PHD S1312 PG Half Slotted Channel, 1-1/8 x 9/16 in Slots, 2 in Spacing, 14 ga Thick, 20 ft L HSI#: FAS50567In stock$37.47$37.47 -
![PHD S1011APG Channel, 1-5/8 in W x 3-1/4 in D x 10 ft L x 12 ga thick, Carbon Steel, Pre-Galvanized, Domestic]()
PHD S1011APG Channel, 1-5/8 in W x 3-1/4 in D x 10 ft L x 12 ga thick, Carbon Steel, Pre-Galvanized, Domestic HSI#: FAS50557In stock$75.53$75.53 -
![Gregory G-STRUT® G214 Corner Joiner Plate, 4 Holes, 3-1/2 in L x 5-3/8 in W, Carbon Steel]()
Gregory G-STRUT® G214 Corner Joiner Plate, 4 Holes, 3-1/2 in L x 5-3/8 in W, Carbon Steel HSI#: FAS60001In stock$4.94$4.94 -
![PHD S5130 EG 90° Corner Angle Fitting, 4 Holes, 4-3/16 in L x 3-1/2 in W, 1/4 in Thick, Carbon Steel, Electro-Galvanized, 0.78 lb]()
PHD S5130 EG 90° Corner Angle Fitting, 4 Holes, 4-3/16 in L x 3-1/2 in W, 1/4 in Thick, Carbon Steel, Electro-Galvanized, 0.78 lb HSI#: FAS50600Call for availability$3.17$3.17 -
![PHD S6025 EG FIG 6025 Post Base, Centered Channel Position, 3-1/2 in H Base, Use with 1-5/8 in Strut, Carbon Steel]()
PHD S6025 EG FIG 6025 Post Base, Centered Channel Position, 3-1/2 in H Base, Use with 1-5/8 in Strut, Carbon Steel HSI#: FAS50621Call for availability$20.00$20.00 -
![PHD S3006 EG Strut Nut Without Spring, 3/8 in Thread, Low Carbon Steel]()
PHD S3006 EG Strut Nut Without Spring, 3/8 in Thread, Low Carbon Steel HSI#: FAS50551Call for availability$0.70$0.70 -
![PHD S5112 EG 90° Corner Angle Fitting, 2 Holes, 2-1/16 in L x 1-7/8 in W, 1/4 in Thick, Carbon Steel, Electro-Galvanized, 0.37 lb]()
PHD S5112 EG 90° Corner Angle Fitting, 2 Holes, 2-1/16 in L x 1-7/8 in W, 1/4 in Thick, Carbon Steel, Electro-Galvanized, 0.37 lb HSI#: FAS50598Call for availability$1.63$1.63 -
![Gregory G-STRUT® GN811 Channel Nut with Short Spring, 3/8-16 Thread, 3/8 in Thick, Steel]()
Gregory G-STRUT® GN811 Channel Nut with Short Spring, 3/8-16 Thread, 3/8 in Thick, Steel HSI#: FAS50552In stock$1.05$1.05 -
![PHD S5345 EG Open Angle Connector, 4 Holes, 3-1/2 in L x 3-1/2 in W, 45° Bend, Low Carbon Steel]()
PHD S5345 EG Open Angle Connector, 4 Holes, 3-1/2 in L x 3-1/2 in W, 45° Bend, Low Carbon Steel HSI#: FAS50610Call for availability$3.73$3.73 -
![PHD S5131 EG 90° Corner Angle Fitting, 4 Holes, 3-7/8 in L x 3-13/16 in W, 1/4 in Thick, Carbon Steel, Electro-Galvanized, 0.76 lb]()
PHD S5131 EG 90° Corner Angle Fitting, 4 Holes, 3-7/8 in L x 3-13/16 in W, 1/4 in Thick, Carbon Steel, Electro-Galvanized, 0.76 lb HSI#: FAS50602Call for availability$3.17$3.17 -
![PHD S5035 EG Flat Tee plate, 4 Holes, 5-3/8 in L x 3-1/2 in W, Carbon Steel]()
PHD S5035 EG Flat Tee plate, 4 Holes, 5-3/8 in L x 3-1/2 in W, Carbon Steel HSI#: FAS60000Call for availability$4.92$4.92 -
![PHD S5110 EG 90° Corner Angle Fitting, 2 Holes, 2-1/4 in L x 1-5/8 in W, 1/4 in Thick, Carbon Steel, Electro-Galvanized, 0.36 lb]()
PHD S5110 EG 90° Corner Angle Fitting, 2 Holes, 2-1/4 in L x 1-5/8 in W, 1/4 in Thick, Carbon Steel, Electro-Galvanized, 0.36 lb HSI#: FAS50800Call for availability$1.63$1.63 -
![Gregory G-STRUT® GN803 Channel Nut, 1/2-13 Thread, 1/2 in Thick, Steel]()
Gregory G-STRUT® GN803 Channel Nut, 1/2-13 Thread, 1/2 in Thick, Steel HSI#: FAS50556In stock$0.91$0.91 -
![nVent Caddy® NUT0025EG Strut Nut, 1/4 in Thread, 3:1 Static Load Safety Factor, 6 ft-lb Torque]()
nVent Caddy® NUT0025EG Strut Nut, 1/4 in Thread, 3:1 Static Load Safety Factor, 6 ft-lb Torque HSI#: FAS50546In stock$4.11$4.11 -
![nVent Caddy® F130000EG Flat Square Channel Washer, 1-5/8 in L x 1-5/8 in W Nominal, 3/8 in ID, 1/4 in Thick, Steel]()
nVent Caddy® F130000EG Flat Square Channel Washer, 1-5/8 in L x 1-5/8 in W Nominal, 3/8 in ID, 1/4 in Thick, Steel HSI#: FAS50570In stock$3.94$3.94 -
![nVent Caddy® SPRC0025EG Strut Nut with Spring, 1/4 in Thread, 3:1 Static Load Safety Factor, 6 ft-lb Torque]()
nVent Caddy® SPRC0025EG Strut Nut with Spring, 1/4 in Thread, 3:1 Static Load Safety Factor, 6 ft-lb Torque HSI#: FAS50547In stock$4.16$1.98Savings: $2.18 (52%) -
![PHD S5015 EG Splice Plate, 4 Holes, 7-1/4 in L x 1-5/8 in W x 1/4 in Thick, Low Carbon Steel]()
PHD S5015 EG Splice Plate, 4 Holes, 7-1/4 in L x 1-5/8 in W x 1/4 in Thick, Low Carbon Steel HSI#: FAS50585Call for availability$3.27$3.27 -
![PHD S5730 EG 4-Hole Splice Clevis, 7-1/4 in L x 1/4 in Thick, For Use with Fig 1000 and Fig 1100 Strut, Low Carbon Steel]()
PHD S5730 EG 4-Hole Splice Clevis, 7-1/4 in L x 1/4 in Thick, For Use with Fig 1000 and Fig 1100 Strut, Low Carbon Steel HSI#: S5730 EG-12361Call for availability$13.20$13.20
