Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple, 5/16, 3/8, 1/2 in Staple Length
Mayhew™ 62065 X-Long Pin Punch Kit, Hex Shank, 9-1/2 in OAL, 5 Pcs
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade
Chicago Hardware 20145 2 Screw Pin Anchor Shackle, Class 2, 6.5 ton WLL, 7/8 in Size dia, 1 in Pin dia, Hot Dipped Galvanized
Manufacturer #20145 2
In stock
$54.47
$54.47
Quantity Break Pricing may apply in the cart
HSI
20145 2-10402
Chicago Hardware 20145 2 Screw Pin Anchor Shackle, Class 2, 6.5 ton WLL, 7/8 in Size dia, 1 in Pin dia, Hot Dipped Galvanized is available to buy in increments of 1
Product Overview
Chicago Hardware screw pin anchor shackle, class 2, 6.5 ton working load limit, 7/8 in Size, 1 in Pin dia, 3-1/4 in inner length, 2-5/8 in inner width, 1-7/16 in opening, 2-1/8 in Eye outer, Drop Forged Carbon Steel Body, Alloy Steel Pin, Hot Dipped Galvanized.
Features
- Size, working load limit and trademark are permanently marked on all shackles
- All shackles and pins are heat treated
- Loads are based on a design factor of 6:1
- When tested all shackles are pulled at a uniform rate of speed in a direct tension
- +/-1/16 in L tolerance
- +/-1/4 in W tolerance
Specifications
| Manufacturer Part Number | 20145 2 |
|---|---|
| Manufacturer | Chicago Hardware & Fixture |
| Brands | CHICAGO HARDWARE |
| Working Load Limit (ton) | 6.5 |
| Type | Class 2 |
| Package Quantity | 1/Each |
Reviews
Write Your Own Review